Specs& Systems: Honeycomb Shade- Vali

Basic Specs

[Size]Cell size: 38mm
Custom-made includes headrail hardware: Can be customized within 300cm(W) x 360cm(H)

[Material] Non-woven cloth, metal headrail, black-out type. Inner wall of cells is black-out metallic film
[Cleaning] Non-washable on the surface, use a dry cloth, duster or a vacuum cleaner with a brush head to dust.


■ Complete installation instructions and components attached

Sizes& Figures

Pulling Cord


Cordless／String Loop



■ Brackets and hardwares are included in the blind. The total thickness after installation, depending on the system sizes and directions of installation, is about 4.5cm~5.5 cm.
■ If the blind is installed in the curtain box or notch, the inner depth should be at least more than 6cm for smooth installation.  
■ The covering area indents 0.2cm from left and right sides. It almost aligns with the headrail.

 

Choosing Systems

1. Bottom-Up（Adjust the covering area only from the bottom）


2. Top-down Bottom Up（The middle rail can be fixed in the middle）

 

Choosing Operation 

1. Pulling Cord（Safety guide attached）


2. Cordless（Max height 210cm）


3. Continuous Cord Loop（Safety Hook attached／Max height 300cm）


4. Motorized

 

Additional Purchase Services

■ System－Top Down Bottom Up
■ Operation－Cordless／Continuous Cord Loop
■ Tassel－
Pulling Cord：Metallic S Tassel, Zinc Alloy, One-piece. Replace the standard plastic tassel
String Loop：All kinds of Tassel M. Design in Europe, Decorative tassel

Operation／Cleaning 

Video：

Honeycomb Shade

DIY illustration of Honeycomb Shade-Cordless

 
■ Tools: A ladder, an electric drill (with 6mm tail), a hammer, electric screwdriver, a measuring tape, a level and a pencil.
■ Components: handle clip of bottom rail, handle clip of middle rail, self-tapping screws, normal screws, plastic nylon anchors, safety hook, brackets.

Steps:
 

1. Decide the method of fitting brackets: Top-fixing or Face-fixing.

2. Mark reference holes to fix support bracket. Make sure that they are leveled.

* Avoid placing the bracket onto the parts of headrail and hinder operation of the blinds.
* 3 to 4 brackets might be needed for wider products. The distances between these brackets should be the same to avoid uneven weight. *

3. Drill at the reference mark, nail plastic nylon anchors into the wall and secure the mounting brackets.

4. Snap the front clip of the spring bracket into the notch on the upper side of the shade. 

5. Push up and level the headrail to fit in the notch at the back of the headrail.

6. Installation complete

Accessories of Cordless System: 

The handle clips of the middle (bottom) rail: Place them in the middle point of the rail facilitates the operation.

* this installation is optional depending on your usages.

Accessories of loop cord system：

Safety hook:  Set strings in and straighten it and screw tightly on the wall.

* This installation is optional depending on the usage and child safety environment. 

Install Honeycomb Shade-Cordless：

* Notice: Keep children away from accessories, pulling cords and slats. Any installation question, please contact MSBT staff for assistance.  
* Attachment: Honeycomb Shade Installation Instruction in A4　Download／Print