Sizes& Figures

■ Brackets and hardwares are included in the blind. The total thickness after installation, depending on the system sizes and directions of installation, is about 6.5 cm.
■ If the blind is installed in the curtain box or notch, the inner depth should be at least more than 9cm for smooth installation.  
■ The covering area indents 0.2cm from left and right sides. It almost aligns with the headrail.

Decide which way you'd like to install your curtain, inside mount or outside mount. Measure by the following instructions: 

Inside Mount

■ Install within the window frame. Fit in the window frame.
■ Simple and smooth outlook.  Reduce the area of covering window. 

Inside Mount Measurement

STEP 1：Measure the in frame width
Please measure positions of left, middle, and right. Write down the minimum figures of these three, and that is the blind width. 

STEP 2：Measure the in frame height 
Please measure positions of left, middle, and right. Record the maximum figures of these three, and that is the blind height

STEP 3:  Measure the depth of window frame & the thickness of handle bar exceeds window frame. 
Depth of window frame — thickness of operating bar exceeds window frame  ≧ 6cm, the blinds can fit in the frame. 

■ Minimum size unit: 0.5cm
■ The shape of window may not be vertical and level. It is suggested to measure three positions of height and width to avoid 
    unseccessful installation. 
■ Reduce 0.5~1cm is suggested for customized width. This is to leave some space for possible alteration in installation work.

Outside Mount

■ Install on the surface, wall, or ceiling beyond the range of frame.
■ Can cover the window completely and hide window frame, increase covering area and reduce light leak in 
    from surroundings. 
■ Can hide the shape of window and adjust visual effect of the space. 

Outside Mount Measurement

STEP 1 Decide the length of blind:
Measure the in-frame width + extra width expected to cover = width needed

STEP 2 Decide the width of blind:
Measure the in-frame height + extra height expected to cover = height needed

■ Minimum size unit: 0.5cm
■ It is suggested to add more than 5~10cm all around the window frame. The actual extra covering area depends on the conditions of 
   the space or visual effects requested. 
■ If installed in the curtain box, reduce 0.5~1 cm on customized width is suggested to keep some space for possible alteration in 
   installation.

Reminders

■ The surroundings of window has to be completely flat and no obstables around when deiciding window sizes. 
■ Sizes shown on the products in the shipment are the complete sizes including systems and components.

Illustrations of sizes of window/ curtain box

Video instruction

How to get complete sizes on installation area of inside mount/ outside mount?
How to know inside mount/ outside mount is best for your blinds/ curtains? 

>> Complete instruction