Installation Steps
Installation Tools
Detailed steps
Notes and Attachments

Installation Steps

Roller blind installation tutorial video

Step 1: Confirm the installation bracket position
Step 2: Fix the bracket
Step 3: Pay attention to horizontal alignment.
Step 4: Snap the bracket base cover in place.
Step 5: Securely insert the tailpipe shaft.
Step 6: Hang the curtains from the end.
Step 7: Securely fasten the beaded chain to the end. 
Step 8: Remove the fabric roll straps
Step 9: Insert the side cover of the bracket.
Step 10: Install the bead chain holder
Step 11 Secure the beaded chain to ensure child safety

Installation Tools

Prepare tools

A ladder, an electric drill (with 6mm tail), a hammer, electric screwdriver, a measuring tape, a level and a pencil.

Parts contents

Self-tapping screw,suitable for metallic surfaces

Screws

Plastic nylon anchor

Bracket

Pin end

Safety hook

Side cover of brackets

Base cover of brackets

Alternatively go to

>> Installation tutorial for ready-made roller blinds
>> Tutorial on installing a deluxe roller blind

Detailed steps

Decide the method of fitting brackets: Face-fixing, Top-fixing or Side-fixing.
Mark reference holes to fix support bracket. Make sure that they are leveled.
Drill at the reference mark, nail plastic nylon anchors into the wall and secure the mounting brackets.
Push the bottom of the base cover into the notch of the bracket. It is securely locked when you hear “click” sound.
※This installation is optional, depending on the space of installation site or aesthetic demands.
5-1. Make sure the end engraved with the word-“metal” insert into the bracket, and it is securely locked after hearing “click” sound.
5-2. Place the end of the roller blind into side cover of brackets.
※ The idler end (the opposite side of ball chain) is the direction of installing the end.
Make sure the the end of ballchain control engraved with word-“metal” is locked into the bracket. Hearing click sound means it is securely locked into the clutch.
Insert the side cover of the bracket into the notch of bracket; hearing click sound means it is tightly locked into the side cover of the bracket.
※This installation is optional, depending on the space of installation site or aesthetic demands.

Fix ball chain on the safety hook and straighten it. Secure safety hook on the wall with screws.
* The installation is optional, depending on your habits and housing environment of child safety.
※ If using Tassel beaded pendant This part cannot be installed.

Installation complete

Notes and Attachments

Keep children away from accessories, pulling cords and slats. Any installation question, please contact MSBT staff for assistance.
Related Attachments
Minimalist Custom roller blinds Installation instructions (A4)
Download/Print

A4 Instruction Manual for Installation of Deluxe Roller Blind
Download/Print