Installation Steps
Honeycomb blind installation tutorial video
Step 1: Confirm the installation bracket position
Step 2: Pay attention to horizontal alignment.
Step 3: Fix the bracket
Step 4: Hang and fasten the curtains.
Step 5: Install the bead chain holder
Step 6: Secure the beaded chain to ensure child safety.
Installation Tools
Prepare tools
A ladder, an electric drill (with 6mm tail), a hammer, electric screwdriver, a measuring tape, a level and a pencil.
Parts contents
Self-tapping screw,suitable for metallic surfaces
Screws
Plastic nylon anchor
Bracket
handle clips of the middle (Middle) rail
handle clips of the middle (bottom) rail
Safety hook
Detailed steps
Mark reference holes to fix support bracket. Make sure that they are leveled.
※ Avoid placing the bracket onto the parts of headrail and hinder operation of the blinds.
※ 3 to 4 brackets might be needed for wider products. The distances between these brackets should be the same to avoid uneven weight.
※ To avoid blinds from falling, make sure the headrail is securely locked.
※ Users can freely choose whether to install it based on their usage habits and the safety of children at home.
※ This part cannot be installed if a Tassel pendant is used.
※ this installation is optional depending on your usages.
Notes and Attachments
Non-woven honeycomb blind installation instructions (without pull cord/with loop pull cord) A4 size manual
Non-woven honeycomb blind pull cord installation instructions (A4 size)
